Outdoor LED Sign – Full Color – Economy – 20mm

$4,279.00$30,929.00

Our Economy Outdoor LED Signs are the most simple and cost effective way to get your very own LED sign. This particular model is a 20mm pixel pitch that comes in a wide variety of sizes.  Select the options below to see pricing or check out our pricing table tab below.

  • Double Sided
  • Single Sided
Clear
$
SKU: N/A Category: Tag:
Dimensions N/A
Display Height

1' 0.5", 1' 7", 2' 1.25", 2' 7.5", 3' 1.75", 3' 8", 4' 2.5"

Display Width

3' 1.75", 4' 2.5", 5' 3", 6' 3.5", 7' 4.25", 8' 4.75", 9' 5.5", 10' 6", 11' 6.5"

Matrix Sizes

16 x 80, 16 x 96, 16 x 112, 16 x 128, 16 x 144, 16 x 160, 16 x 176, 24 x 48, 24 x 64, 24 x 80, 24 x 96, 24 x 112, 24 x 128, 24 x 144, 24 x 160, 24 x 176, 32 x 48, 32 x 64, 32 x 80, 32 x 96, 32 x 112, 32 x 128, 32 x 144, 32 x 160, 32 x 176, 40 x 48, 40 x 60, 40 x 64, 40 x 80, 40 x 96, 40 x 112, 40 x 128, 40 x 144, 40 x 160, 40 x 176, 48 x 48, 48 x 64, 48 x 80, 48 x 96, 48 x 112, 48 x 128, 48 x 144, 48 x 160, 48 x 176, 56 x 112, 56 x 128, 56 x 144, 56 x 160, 56 x 176, 56 x 48, 56 x 64, 56 x 80, 56 x 96, 64 x 48, 64 x 64, 64 x 80, 64 x 96, 64 x 112, 64 x 128, 64 x 144, 64 x 160, 64 x 176

Faces

Double Sided, Single Sided

Parts Warranty

5 Years

Labor Warranty

Optional 5 Year

UL Listed

Yes

UL Energy Verified

Yes

Weather Rating

IP 65

Integrated Surge Suppression

Yes

Aluminum Frame

Yes

Cabinet Type

Hinged

Cabinet Color

Almond, Blue, Bristol Blue, Burgundy, Caramel, Dark Brown, Dark Red, Gold, Holly Green, Pewter, Plumb Purple, Royal Blue, Silver Grey, Spartan Bronze, Teal Green, Black, White

Temperature Control Fans

Optional

Front Ventilation Option

No

Pixel Pitches

10mm

Brightness

> 10,000 nits

LED Module Type

Screw Down

Controller Type

Integrated PC

Frames Per Second

60

Color

Full Color

Graphics Capabilities

AVI, BMP, GIF, JPG, MPEG, SWF, WMV

Communication Methods

Cell Connect, Ethernet, Fiber Optic, Wi-Fi

Sign Software

Sign Command

Features

Installation Methods

An important aspect of purchasing a sign is the planning and preparation of how it will be installed. We offer several different installation and mounting methods for our LED signs and sign cabinets. Unless noted, each method is available for our 7″ and 10″ extrusions.

Sign Communication

An important aspect of purchasing an LED sign is the planning and preparation of how it will communicate over the internet with our cloud-based software. We offer several different methods of communication for all our LED signs.

The following factors are important when deciding on a communication method:

  • The availability of internet service at the location of the sign
  • The distance between the sign site and the network
  • The possibility of trenching or burying data cables
  • The speed and reliability of the connection
  • The potential for additional costs associated with the chosen communication method

Cell Connect

communication_cellular

The sign connects to the internet through a wireless data modem that is pre-installed inside the display. The connection uses TCP/IP (Transmission Control Protocol / Internet Protocol), and is accomplished through the wireless service provider.

Wireless data plan is managed by ESD, and includes unlimited data for 5 years or a lifetime plan Provided by Verizon Wireless’ extensive 4G LTE coverage area.

  • Distance: Maximum of 1,500 feet* between antennas
  • Advantages: Wireless, no trenching for cables. Inexpensive method for communicating to sign. Fast data transfer rates.
  • Disadvantages: Requires line-of-sight between both antennas with no obstructions. Obstructions may reduce the distance between devices, result in intermittent connectivity or in no connectivity. Requires the installation of a device outside, typically on the side of the building. Subject to interference from other wireless systems and electromagnetic emissions, such as cordless phones and two-way radios.
  • Requirements: Line-of-sight between antennas.

Wi-Fi via Radio Frequency Modems

communication_wireless

The sign connects to the customer’s internet router or network device through a pair of wireless network devices. One device is pre-installed inside the sign with an exposed antenna, and the other is typically installed on an outside wall that is facing the display. This wireless device is connected to the network device via an Ethernet cable.

The two devices communicate with each other using RF technology that operates on the 2.4 GHz frequency. The devices require a line-of-sight between them for maximum distance and signal strength. Obstructions such as walls or trees will reduce the effectiveness of the wireless devices.

  • Distance: Maximum of 1,500 feet* between antennas
  • Advantages: Wireless, no trenching for cables. Inexpensive method for communicating to sign. Fast data transfer rates.
  • Disadvantages: Requires line-of-sight between both antennas with no obstructions. Obstructions may reduce the distance between devices, result in intermittent connectivity or in no connectivity. Requires the installation of a device outside, typically on the side of the building. Subject to interference from other wireless systems and electromagnetic emissions, such as cordless phones and two-way radios.
  • Requirements: Line-of-sight between antennas.

Ethernet Cable

communication_ethernet

The sign communicates to the customer’s internet router or network device with an Ethernet network signal. This is done through a Cat5e or Cat6 cable, up to 330 feet, that is connected between the sign and network device. The connection uses TCP/IP (Transmission Control Protocol / Internet Protocol).

  • Distance: Maximum cable length of 330 feet.
  • Advantages: No additional cost and no extra devices required.
  • Disadvantages: Maximum cable length is 330 feet, and cable must be run to the sign site. Costs associated with trenching for data cable needs to be considered, especially if running cable across a paved parking lot
  • Requirements: Outdoor Cat5e or Cat6 cable, such as Belden 7919A or Belden 1594A, and the separation of electrical and Ethernet cables by a minimum distance of 12 inches.

Fiber Optic Cable

communication_fiber

The sign communicates with the customer’s internet router or network device with an Ethernet network signal through a fiber optic cable. The connection uses TCP/IP (Transmission Control Protocol / Internet Protocol). A pair of media converters is included, with one factory installed inside the sign and the other attached to the network.

  • Distance: Maximum cable length of 1.2 miles
  • Advantages: Increases the maximum distance between the sign and building. As fiber is not affected by electrical interference, can be placed in the same trench as the electrical line.
  • Disadvantages: Additional devices are required, and cable must be run to the sign site. Costs associated with trenching for data cable needs to be considered, especially if running cable across a paved parking lot.
  • Requirements: Ask your representative for details.

USB Drive

communication_usb

The user exports the new display message or other settings to a provided USB drive. The USB drive is then brought out to the display and plugged into the USB port for transfer. Once transfer is complete, the USB drive can be removed.

This method is available standard on all our LED Signs, and is typically used as a secondary method of communication in case of issues with the primary method.

  • Distance: None. The user must have physical access to the USB port.
  • Advantages: No additional cost and no extra devices required. Can be used as a backup in case of an issue with another communication method.
  • Disadvantages: User must walk out to the display to change the message.
  • Requirements: Accessibility of the USB box. This may require special consideration for high wall-mounted displays, or otherwise inaccessible display cabinets.

Pricing Table

Display Height
Display Width
Faces
Price range
to GO
Filters Sort results
Product Details
Dimensions
Buy Now
economy-20mm-16x80-single-sided-full-color-led-display

Display Height: 1' 0.5", Display Width: 5' 3", Faces: Single Sided

63 × 7.5 × 12.5 in
$4,279.00
economy-20mm-16x96-single-sided-full-color-led-display

Display Height: 1' 0.5", Display Width: 6' 3.5", Faces: Single Sided

75.5 × 7.5 × 12.5 in
$4,574.00
economy-20mm-16x112-single-sided-full-color-led-display

Display Height: 1' 0.5", Display Width: 7' 4.25", Faces: Single Sided

88.25 × 7.5 × 12.5 in
$4,886.00
economy-20mm-24x48-single-sided-full-color-led-display

Display Height: 1' 7", Display Width: 3' 1.75", Faces: Single Sided

37.75 × 7.5 × 19 in
$4,998.00
economy-20mm-16x128-single-sided-full-color-led-display

Display Height: 1' 0.5", Display Width: 8' 4.75", Faces: Single Sided

100.75 × 7.5 × 12.5 in
$5,204.00
economy-20mm-32x48-single-sided-full-color-led-display

Display Height: 2' 1.25", Display Width: 3' 1.75", Faces: Single Sided

37.75 × 7.5 × 25.25 in
$5,221.00
economy-20mm-24x80-single-sided-full-color-led-display

Display Height: 1' 7", Display Width: 5' 3", Faces: Single Sided

63 × 7.5 × 19 in
$5,518.00
economy-20mm-16x144-single-sided-full-color-led-display

Display Height: 1' 0.5", Display Width: 9' 5.5", Faces: Single Sided

113.5 × 7.5 × 12.5 in
$5,586.00
economy-20mm-24x64-single-sided-full-color-led-display

Display Height: 1' 7", Display Width: 4' 2.5", Faces: Single Sided

50.5 × 7.5 × 19 in
$5,626.00
economy-20mm-40x48-single-sided-full-color-led-display

Display Height: 2' 7.5", Display Width: 3' 1.75", Faces: Single Sided

37.75 × 7.5 × 31.5 in
$5,748.00
1 2 13